Discover How To Choose The Best Dent Puller

July 9, 2014 | By Linda More

You will find 2 main types of dent pullers available for the consumer. The first is a suction based puller, which uses a suction cup to cling onto the body surface. The second is a glue based puller, in which a glue is utilized to cling to the body surface of the vehicle. In most consumer level kits the puller fits into a crossbar with 2 feet that will be placed outside of the dented spot to give leverage.

Famous glue based pullers such as the Dent Doctor and Dent Out use a crossbar to control the rate the dent is removed. Just apply a little bit of glue onto the end of the dent puller and place it to the lowest point of the dent. And then glide the crossbar on the threaded area of the puller setting the feet on an unharmed area of the body panel if possible. All that’s remaining is to put the wing nut tool over the threaded section and tighten it up, it will begin drawing the dent puller away and the dented portion of the body panel with it.

You can find a wide selection of suction pullers to choose from, with all the additional bonus that they could be used for other lifting jobs in your home or storage area. They can make fantastic handles to work with when relocating large smooth surfaced items like window panes and sheet metal. Many suction pullers use a mechanism in the handle that is triggered either by pulling on a bar or squeezing 2 handles together to remove the air between the cup and the surface area it is placed alongside. Once the puller is placed firmly you just draw the dent out. A small bit of lubricant or water applied on the rim gives you the perfect seal.

Could a dent puller be utilized for all kinds of dents?

Dent pullers are best for dents which do not possess a crease passing through them. If employed on a dent that does have a crimp through it, the puller will get rid of the dent however it can’t do anything to mend the crease. To get rid of a crimp, a dent pusher will be necessary and the body panel must be taken out to fix it. While many dents will come out right after the initial try, bigger dents might need repeated use to fully fix them.

When used according to instructions, they may be an affordable and simple maintenance for minor body dent that will keep your vehicle out of the repair shop. A dent puller is definitely an item which should be in every tool kit to fix all the tiny dings and dents associated with daily chores.

Source: Articledashboard.com

Category: Repair